Skip to main content
logo

Request Quote

Contact

Chemical Compatibility

Phosphoric Acid, 80% Compatibility with O-Ring Materials

See how Nitrile, Viton (FKM), EPDM, FFKM, silicone and other seal materials rate against Phosphoric Acid, 80%, with an A–D chemical resistance scale.

Back to Chemical Compatibility Checker
MaterialCodeTrade NamesRating
Nitrile (Buna-N)NBRBuna-N, HycarD
Hydrogenated NitrileHNBRTherban, ZetpolX
Fluorocarbon (Viton)FKMViton, FluorelA
PerfluoroelastomerFFKMKalrez, ChemrazA
Ethylene PropyleneEPDMNordel, VistalonA
SiliconeVMQSilastic, ElastosilD
FluorosiliconeFVMQFluorosilicone LS, Silastic FSRC
Neoprene (Chloroprene)CRNeoprene, BayprenX
Natural RubberNRNR, Isoprene (IR)X
Styrene ButadieneSBRBuna-S, GR-SX
ButylIIRButyl, Exxon ButylX
PolyurethaneAUAdiprene, VibrathaneX
Aflas (TFE/P)FEPMAflas, FEPMA
ABCDX

Guideline only. Values and ratings are representative at ambient conditions and are not a warranty of performance. Actual results vary with temperature, pressure, concentration and exposure time. Validate for your specific application — our engineers can help.

Choosing a seal material for Phosphoric Acid, 80%

The table above rates every common O-ring elastomer for service in Phosphoric Acid, 80% on an A–D scale. A is Excellent, B is Good, C is Fair (test before relying on it), and D is Not Recommended. An X indicates insufficient published data.

For Phosphoric Acid, 80%, the strongest candidates are Fluorocarbon (Viton), Perfluoroelastomer, Ethylene Propylene, Aflas (TFE/P). These ratings are representative at ambient conditions (~20°C). Compatibility shifts with temperature, concentration, pressure and exposure time, so always validate the material against your real operating envelope before committing to a design.