Skip to main content
logo

Request Quote

Contact

Chemical Compatibility

Fyrquel 150, 220, 300, 550 Compatibility with O-Ring Materials

See how Nitrile, Viton (FKM), EPDM, FFKM, silicone and other seal materials rate against Fyrquel 150, 220, 300, 550, with an A–D chemical resistance scale.

Back to Chemical Compatibility Checker
MaterialCodeTrade NamesRating
Nitrile (Buna-N)NBRBuna-N, HycarD
Hydrogenated NitrileHNBRTherban, ZetpolD
Fluorocarbon (Viton)FKMViton, FluorelA
PerfluoroelastomerFFKMKalrez, ChemrazA
Ethylene PropyleneEPDMNordel, VistalonA
SiliconeVMQSilastic, ElastosilA
FluorosiliconeFVMQFluorosilicone LS, Silastic FSRB
Neoprene (Chloroprene)CRNeoprene, BayprenD
Natural RubberNRNR, Isoprene (IR)D
Styrene ButadieneSBRBuna-S, GR-SD
ButylIIRButyl, Exxon ButylA
PolyurethaneAUAdiprene, VibrathaneD
Aflas (TFE/P)FEPMAflas, FEPMA
ABCDX

Guideline only. Values and ratings are representative at ambient conditions and are not a warranty of performance. Actual results vary with temperature, pressure, concentration and exposure time. Validate for your specific application — our engineers can help.

Choosing a seal material for Fyrquel 150, 220, 300, 550

The table above rates every common O-ring elastomer for service in Fyrquel 150, 220, 300, 550 on an A–D scale. A is Excellent, B is Good, C is Fair (test before relying on it), and D is Not Recommended. An X indicates insufficient published data.

For Fyrquel 150, 220, 300, 550, the strongest candidates are Fluorocarbon (Viton), Perfluoroelastomer, Ethylene Propylene, Silicone, Fluorosilicone, Butyl, Aflas (TFE/P). These ratings are representative at ambient conditions (~20°C). Compatibility shifts with temperature, concentration, pressure and exposure time, so always validate the material against your real operating envelope before committing to a design.